Tilbury Auto

Products

Forged, turned and finished to your drawing.

Eight component families in five certified material grades, from near-net forgings through to precision turned parts and the full standard fastener range.

1010101815B2516MnCr5SS316
Forged ball joints and housing components

Component range

Precision Turned Components

Turned and milled to drawing on CNC lathes and vertical centres.

Process
CNC turning + vertical milling
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Front Fork Components

Tubes, sliders and seats for two-wheeler suspension.

SpecificationHide specification
Process
CNC turning + vertical milling
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Spline Forge Components

Splined shafts forged near-net, then finish machined.

SpecificationHide specification
Process
Hot forging + finish machining
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Ball Joints & Housing

Hot forged joints, studs and housings for steering and suspension.

SpecificationHide specification
Process
Hot forging + machining
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Steering Components

Threaded caps, collars and lock rings machined to fine finish.

SpecificationHide specification
Process
CNC turning + vertical milling
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Gear Blanks & E-Axle

Forged blanks and e-axle parts for electrified drivelines.

SpecificationHide specification
Process
Hot forging + machining
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Hub Bearing

Turned races and hub rings, forged near-net first.

SpecificationHide specification
Process
Hot forging + precision turning
Size range
On request
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Standard Fasteners

Cold forged nuts, bolts and screws in five certified grades.

SpecificationHide specification
Process
Cold forging
Size range
M4-M14
Materials
1010 · 1018 · 15B25 · 16MnCr5 · SS316
Finish
Zinc flake or to spec
Ask for tolerances & drawings →

Five certified grades.

Everything below is stocked and certified. Other grades are run to order against your specification.

1010
Low-carbon steel
Cold formed weld nuts, collars and low-stress fasteners. Formable and readily weldable.
1018
Low-carbon steel
Turned bushes, studs and general machined parts. Better machinability and a cleaner finish than 1010.
15B25
Boron-treated carbon steel
Heat-treatable fasteners to property class 8.8 and above. Boron raises hardenability without alloy cost.
16MnCr5
Case-hardening alloy steel
Gear blanks, splined shafts and e-axle parts. Carburised for a hard surface over a tough core.
SS316
Austenitic stainless
Corrosion-critical parts that ship uncoated, where a plated finish would not survive service.

Fourteen families, cold forged in volume.

Standard nuts to special components. If you can draw it, the formers can strike it.

Hex Nuts

M4-M14

Heavy Hex Nuts

High load

Thin Nuts

Jam

Flange Nuts

Serrated

Hex Weld Nuts

Projection

Square Weld Nuts

Projection

Lock Nuts

All-metal

Nyloc Nuts

Nylon insert

Rivet Nuts

Blind

Collar Sleeves

Custom

T-Nuts, Round

Pronged

T-Nuts, Square

Panel

Round Bush

Turned

Grub Screws

MM + Inch

Send a drawing.
Get a straight answer.

Upload your part drawing and engineering will come back with feasibility, tooling and lead time.

Send your drawingWhatsApp +91 99917 88786
admin@tilburyauto.com

Replies within one working day